Help with a leak in my bibs...

SKTR 20i · Post by **SKTR 20i** » Fri Dec 10, 2010 9:10 am

I noticed last rain that I have 2 small leaks in my bibs (one in the knee, one in the seat. Tried to sew where the seam seperated but no help. Tried Scotch Guard no help. Does anyone know of a place in the Delta area that may be able to repair them. Or a fix that someone has used in the past.

Thanks, John.

TCS · Post by **TCS** » Fri Dec 10, 2010 9:46 am

Check with a local hunting shop or cabelas. I know they have patch kits for duck hunting bibs/waders.

Skeeterman · Post by **Skeeterman** » Fri Dec 10, 2010 9:58 am

Duck Tape.

brambo0311 · Post by **brambo0311** » Fri Dec 10, 2010 11:01 am

Aqua seal the seams on the inside and get a few bottles of rejuvinate. You wet the gear then spray with the rejuvenate then throw in the dryer. If the seams are split re sew them then glue.

bassaddicted · Post by **bassaddicted** » Fri Dec 10, 2010 10:36 pm

If its a manufacture defect you can send them back, if they determine it is manufacture defect they will send you new one if not able to fix them. Only problem with that is your without bibs.

Bill K · Post by **Bill K** » Sat Dec 11, 2010 6:30 am

If it is not to large a split, etc. I have used the liquid electric tape/dip that you can buy at your local hardware store. Put a coat on outside and inside area and let it set up. Bill K