installing new electronics ?

Post Reply
McLovin
Posts: 231
Joined: Wed Feb 06, 2008 6:12 pm
Location: Manteca

installing new electronics ?

Post by McLovin »

Ok, so I live in tracy. I am looking for someone who knows about and can install electronics. any sugestions ? Thanks Jesse ochoa

\
Ken Sauret
Posts: 776
Joined: Sun Oct 18, 2009 7:39 pm
Location: Paso Robles California
Contact:

Re: installing new electronics ?

Post by Ken Sauret »

Most of the boat dealers can assist you with questions or do the work for you, depends on what you need.
Ken Sauret
Lowrance Pro Staff
Lowrance http://www.lowrance.com/
Yamamoto https://store.baits.com/home
Dobyns Rods http://www.dobynsrods.com/
Yamaha http://www.yamaha-motor.com/
Personal Web Site http://kensbassfishing.weebly.com/
corkvet
Posts: 53
Joined: Tue May 17, 2005 8:18 am

Re: installing new electronics ?

Post by corkvet »

See Gene at the Hook. He did all of mine. Superior work and very reasonable. Plus you have a tackle store to spend the money you saved!
McLovin
Posts: 231
Joined: Wed Feb 06, 2008 6:12 pm
Location: Manteca

Re: installing new electronics ?

Post by McLovin »

I need to replace my 332 in the dash. Lawrance says they know longer service this unit. they will sell me a 520 for$362 which is a good price. I was wondering if there is a better unit that will fit in the same hole in my dash.
User avatar
StockOption
Posts: 1900
Joined: Sun Mar 05, 2006 6:29 pm

Re: installing new electronics ?

Post by StockOption »

You can find the dimensions for the 332 here on page 37 and the template on page 40:

http://www.lowrance.com/upload/Lowrance ... 121704.pdf


Given those I would then go through the manuals for the other units here, compairing dimensions to see which ones will fit:

http://www.lowrance.com/en/Downloads/Manuals/


A quick look leads me to believe the 520 will fit perfectly.

The HDS 5 may fit too and if you can afford it I would consider that unit as you'll then be able to add structure scan at another time if desired.
Kurt
McLovin
Posts: 231
Joined: Wed Feb 06, 2008 6:12 pm
Location: Manteca

Re: installing new electronics ?

Post by McLovin »

Thank you stockoption for your time. After talking to c&c marine they said that the HDS5 will fit. So I think I am going to go with the HDS5. I hope the hds5 is worth the extra money over the 520.
Jeff Antenucci
Posts: 212
Joined: Tue May 12, 2009 10:43 am
Location: Danville, CA

Re: installing new electronics ?

Post by Jeff Antenucci »

Give Mike Osgood a call, (408) 821-2948. He is located in Manteca and is the one I personally take all my electronic issues too.
eagle123777
Posts: 642
Joined: Wed Jun 08, 2005 1:47 pm
Location: manteca, ca

Re: installing new electronics ?

Post by eagle123777 »

if the hd5 fits then all you should have to worry about is do you have gray cable connectors(older) or blue cable connectors. unless lowarance changed them for the new models, which i doubt as boat owners would have to pull new cables. all you should have to do is unplug the old one and plug in the new one..my 08 came with a 135 unplugged and plugged in a 520 but the side scanners could have changed things.
Post Reply