Need help finding mechanic to work on old 2 stroke in Central Valley

Post Reply
ZacktheWop
Posts: 37
Joined: Tue Mar 17, 2020 4:53 pm

Need help finding mechanic to work on old 2 stroke in Central Valley

Post by ZacktheWop »

Hey guys I bought an old 88 tracker (with an 88' 70hp 2 stroke Merc) off someone from Facebook and shortly after the engine started giving me problems. I had a mobile mechanic come over and take a look at it 4 or 5 times and we could never get it figured out. At this point the motor is not sparking at all. We replaced all electronics on the engine and replaced the impeller. We started out with a bad coil and replaced all of them. When we were diagnosing a misfire we lost spark completely. He came back and installed a stator, a trigger, a rectifier, and a switch box.... still no spark even with ignition isolated. Tried reaching out to a couple of places. Only CC got back to me but told me they don't work on outboards that old.

Trying to find someone around the 209 area that specializes in these old outboards to take one final look before I go out and buy a used one to replace it. With that being said if anyone knows of any local places that sell used outboards that would also be welcomed.

Thanks

-Zack
not4un
Posts: 155
Joined: Tue Mar 21, 2006 5:52 pm
Location: Hughson, CA

Re: Need help finding mechanic to work on old 2 stroke in Central Valley

Post by not4un »

Call Jasson Oliver at Oliver outboards 209-985-0950 he is a certified Master Merc Mechanic. He is in the Ceres/Keyes area
jiggin4bass
Posts: 1858
Joined: Mon Mar 21, 2011 9:27 pm

Re: Need help finding mechanic to work on old 2 stroke in Central Valley

Post by jiggin4bass »

T & L outboard repair
1950 N. Academy Ave.
Sanger ca. 93657
559-875-7626
Tony is the owner
He old school repair and good at it also.

I have a 76 monark 1976 Merc 850 thunderbolt 85 hp
Tony did all my work when I bought it last year and it run outstanding.
Home Of The Original Puffball Jig
Home Of The Original Lions Collar Jig
Building and fishing custom bass jigs
since 1977
Madera Ca.
Favorite Lakes
Eastman
Hensley
12.5 Eastman
12.9 Eastman
Trace
Posts: 220
Joined: Mon May 16, 2005 10:19 am

Re: Need help finding mechanic to work on old 2 stroke in Central Valley

Post by Trace »

Try Bob's marine in Modesto.
Andrew5414
Posts: 99
Joined: Wed Nov 28, 2018 8:36 pm

Re: Need help finding mechanic to work on old 2 stroke in Central Valley

Post by Andrew5414 »

I second Jason Oliver.
Bobp
Posts: 40
Joined: Wed Aug 01, 2018 10:23 am

Re: Need help finding mechanic to work on old 2 stroke in Central Valley

Post by Bobp »

did you replace the plug wires?
monte300
Posts: 1160
Joined: Thu Mar 02, 2017 12:18 pm
Location: San Ramon

Re: Need help finding mechanic to work on old 2 stroke in Central Valley

Post by monte300 »

Sorry to hear about shotgun approach by mobile mechanic :| I can tell you who to avoid in Stockton area, PM me
Last edited by monte300 on Mon Nov 23, 2020 6:25 am, edited 1 time in total.
gabuelhaj
Posts: 508
Joined: Sat May 07, 2005 8:21 am
Location: Manteca

Re: Need help finding mechanic to work on old 2 stroke in Central Valley

Post by gabuelhaj »

If it has a kill switch, check that. Can’t recommend a mechanic in the area but you can read this to give you an idea to help isolate/troubleshoot the no spark issue:

https://www.cdielectronics.com/wp-conte ... 202012.pdf

Good luck!
Glenn Abuelhaj
Will C
Posts: 52
Joined: Sun Oct 06, 2013 6:03 am

Re: Need help finding mechanic to work on old 2 stroke in Central Valley

Post by Will C »

Paradise Point in North Stockton is talented. Might need to wait a turn but have always solved my mysteries with the old motors.

Off 8 mile Road on Rio Blanco Rd off I-%. A ramp across the street also is available so they can do on the water tests as well.
ZacktheWop
Posts: 37
Joined: Tue Mar 17, 2020 4:53 pm

Re: Need help finding mechanic to work on old 2 stroke in Central Valley

Post by ZacktheWop »

not4un wrote:Call Jasson Oliver at Oliver outboards 209-985-0950 he is a certified Master Merc Mechanic. He is in the Ceres/Keyes area
Thanks, this is promising and not too far for me.
ZacktheWop
Posts: 37
Joined: Tue Mar 17, 2020 4:53 pm

Re: Need help finding mechanic to work on old 2 stroke in Central Valley

Post by ZacktheWop »

Trace wrote:Try Bob's marine in Modesto.
I reached out but they never got back to me. Heard great things about them though.
ZacktheWop
Posts: 37
Joined: Tue Mar 17, 2020 4:53 pm

Re: Need help finding mechanic to work on old 2 stroke in Central Valley

Post by ZacktheWop »

Bobp wrote:did you replace the plug wires?
I am pretty sure he did but I am not gonna lie I don't know jack about working on outboards.
ZacktheWop
Posts: 37
Joined: Tue Mar 17, 2020 4:53 pm

Re: Need help finding mechanic to work on old 2 stroke in Central Valley

Post by ZacktheWop »

gabuelhaj wrote:If it has a kill switch, check that. Can’t recommend a mechanic in the area but you can read this to give you an idea to help isolate/troubleshoot the no spark issue:

https://www.cdielectronics.com/wp-conte ... 202012.pdf

Good luck!
Thanks, Ill check this out although with me trying to troubleshoot I might cause more problems than solutions. :lol:
Rattle
Posts: 298
Joined: Sun Jan 24, 2016 7:05 am

Re: Need help finding mechanic to work on old 2 stroke in Central Valley

Post by Rattle »

I’ve had great service from a Jasson Oliver. Look no further
Post Reply