Bass Fishing Forum - Westernbass.com

FredP

2 year old charger works like new. Decided to change my system around.

Fred Preston
530-300-2125

FredP

Is this transducer still available?

FredP

Will you take $75 for this remote?

FredP

Issac I was looking for more detailed information. I have all the components just wanted connection information or how to wire it up

FredP

Yes but please tell me what you think. I’m not sure what was done.

FredP

I have 3 Lowrance FS 9's installed in my Ranger and want to connect them together with ethernet, then add an Active Target unit into the network on it's own switch.

Currently I have everything but I have to turn on the active target to have ethernet.

Thanks
Fred Preston
530-300-2125

FredP

Upgrading my batteries

Have 2 Odyssey AGM marine batteries $250 for both or $150 each. Less than 2 years old in good condition. Run my Ultrex 24v, no problem all day.
Model - ODX-AGM34M (old 34M-PC1500)

Fred Preston
530-300-2125
fred95901@gmail.com

FredP

I bought my boat with a butt and folding seats. Now that I'm many years older I need another folding seat.
Ranger no longer supports older boats so I'm now looking.

Thanks
Fred
530-300-2125

FredP

I have 3 FS units connected with Ethernet. A Navionics Premium+ card in the console unit. All connected with ethernet with Active Target transducer also. Units don't seem to be sharing the card.
I haven't seen specific information about the FS model sharing charts, Do they?

Help
Fred Preston

FredP

Replacing my unit with an FS model, works fine only 2 years old.
Located Marysville, ca 95901

Call if interested
Fred Preston
530-300-2125

FredP

If you still have it call me

Fred Preston
530-300-2125

FredP

Do you still have that transducer? If so I am interested.

Fred Preston
530-300-2125

FredP

Have Jackplate mounts w/tilt brackets, quick disconnect wiring w/fuses. Also permanent wiring harnesses. 2-12' red Talons with lifetime shaft warrantees. $2500.00 complete The Talons are a must have in shallow water lakes. The prop wash can be eliminated. Fred Preston Marysville, CA 530-300-2125 Tal...

FredP

Please tell me about your tranducers and if it has a Y cable with them.

Fred
530-300-2125

FredP

Looking to change my console unit to a TI2 need an upgraded transducer.

Thank You
Fred

FredP

Greg I’ve got 24 volt system what battery should I use?

Thanks
Fred Preston

FredP

Been fishing a few times there but haven’t figured out what the big smallmouth are eating. Anybody know?

FredP

No didn't think about it at the time. New installation friends boat.

FredP

I have an elite ti2 (A)installed in console and connected by nmea 2000 to another (B). (A) has horizontal lines in top inch and half of screen otherwise sonar is normal. (B) is normal sonar. (A) has a AL 3 in 1 transducer (B) has a universal transducer.
Can you help?

FredP

I've taken this off my console for an upgrade of units. It's only 3 years old and works fine.
It comes with:
power cord
cover
Trolling Motor transducer w/adapter
No mount.

The unit has Lowrance chart/chirp sonar.

Call me
Fred Preston
530-300-2125

FredP

Have two dollies One for. 24 volt Minn Kota and one for a 36 volt.like brand new. DOES NOT FIT universal sonar trolling motor. I’ve in Marysville give me a call. Fred Preston 530-300-2125 The Comfortroll “Ducer Dolly” Trolling Motor Bracket is perfect for anglers who are upgrading the front of the b...

FredP

Have two dollies One for. 24 volt Minn Kota and one for a 36 volt.like brand new. Now have universal sonar trolling motor. I’ve in Marysville give me a call. Fred Preston 530-300-2125 The Comfortroll “Ducer Dolly” Trolling Motor Bracket is perfect for anglers who are upgrading the front of the boat ...

FredP

I have an Elite ti7 on the console and a ti9 on the bow. Their connected with a nmea 2000 network and seem to work ok. What I'm looking for is a tutorial of what I can and can't do with my units. Also an explanation of master and other. Example; can I use the GPS on 1 for both, or the chart. I reali...

FredP

Would like to get a working unit for my boat.

Fred Preston
530-300-2125

FredP

Would like to get a working unit for my boat.

Fred Preston
530-300-2125

FredP

Would like to get a working unit for my boat.

Fred Preston
530-300-2125

FredP

Like new trolling motor only used 18 months. Has TH marine release cable and Lowrance TotalScan transducer bracket by Comfortroll.

Located in Marysville, CA

Fred Preston
530-300-2125

FredP

I have 2 Elite Ti's and the time reads hr/min/second. I would like to change that to hr/min.

Thanks
Fred

FredP

Ken with the latest update it gives the Ti's capability for engine readouts but I can only find Yamaha and Evenrude adapters thru the nmea system. I have a mercury with smart meter so don't really need it but always want to have options.
I'll check with Lowrance.

FredP

With a nmea system for 2 units does the system need an adapter for a mercury pro xs or is there one?

FredP

Scott this Fred Preston from the nutcase. I have a 24 volt trolling motor Minn Kota was thinking about a 27 or 29 series for the trolling motor and something with 1000 cca for the starting motor and electronics. I run a 200 pro xs 2017
Weight is a problem for my boat with the talons on the back.

FredP

Looking for thoughts and comments about these batteries.

Thanks
Fred

FredP

I have a LSS-2/PDT-WBL transducers with "Y" cable connected to my Elite 7Ti. When I go to the installed transducers list which one do I select? Had side scan but lost it must have changed the selected transducer.

HELP, HELP PLEASE
Fred

FredP

I have a LSS-2 structure scan transducer with a PDt-wbl transducer with Y cable connected to a Elite 7Ti. Everything did work now the side scan has stopped. I have sonar, temp and down scan but only the side scan screen with a small white line down the center. Any suggestions or solutions sure would...

FredP

Sorry it's sold

FredP

Like new fits on a HDS Carbon, HDS Gen 3 and elite Ti, all 9 pin. $200 takes it all ready to mount.

Fred Preston
530-300-2125
text or call

FredP

How would I connect them both up to function properly?

FredP

I know why I have the problem but want to know if I have other options such as adding a thru hull transducer in the bilge area. How would I do that?

FredP

I have an Elite Ti 7 on my console with a total scan transducer mounted under my transom extension (Ranger). When I take off I lose the bottom how can I solve this?

Thanks
Fred

FredP

Have a motor that has 45% leak down in #1 cylinder otherwise works ok. Going to buy new motor would like to sell this one for what I can get. Has new lower unit, good computer module and new Alternator. Everything works but motor.

Fred Preston
530-300-2125 cell

FredP

I absolutely love my 703. It's a very all around rod, a little light for really big fish. Compared to the champion 703 much smoother on cast and retrieve.
Talk with Gary or Richard about it.

FredP

I have an Elite 7 TI and am very happy. Although in chart mode the icon of the position icon is a boat but to large. I would like to control it's size or replace it with something smaller and simpler.
Thanks for your input and guidance.

Long time Lowrance user

FredP

Looking for a spare prop to help in the lift after adding a couple Talons on my boat.

Contact Fred: 530-300-2125

FredP

EV14 do you have a cell number or email I can use for pictures?

FredP

The Jack Plate isn't made anymore but will handle up to 250hp motors. It's black aircraft grade alum. I took it off because I wanted a bigger one. Worked fine with my 200 mercury for many years bought it from Kent Brown.

FredP

This jack plate is in good condition. Manual adjustment used on a Ranger boat with Mercury motor.
Located in Marysville call 530-300-2125

FredP

Used T/M quiet with new prop. Decided to update my accessories on my older boat. Works ok asking $250. Shaft length is 42in.
Located in Marysville. Call 530-300-2125 ask for Fred

FredP

Does this apply to the Elite 7Ti totalscan or just the elite 7 chirp.

FredP

I'm Selling mine it will be available later this week. I've got a Minn Kota maxxum 74 with 42 inch shaft. The shaft can be changed easily. Has a new prop and cables, very quiet in operation also internally grounded.
Would like to get $500. Call 530-300-2125 Fred Preston

FredP

Do you still have those brackets?

Search found 103 matches

Tags

Notice